1 / 2
SV08 Meanwell LRS350 Power Supply Mount - No wiring modification — zdjęcie 1
1 / 2

SV08 Meanwell LRS350 Power Supply Mount - No wiring modification

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

SV08 Meanwell LRS350 Power Supply Mount for very short wiring

Ocena
0 / 5
Polubienia
8
Pobrania
19
Wydruki
0
Wyświetlenia
128
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hardware needed to install

  1. Screw M4x6 - 8pcs (Screw on PSU)

  2. Screw M5x10 - 3pcs

  3. T Slot Nut 2020 M5 - 3pcs

  4. Factory power supply mount screws - 1pcs

You will need to remove the extra plastic tabs in the printer base that secured the stock power supply, as well as use metal shears to cut through the metal casing.

Tagi