Insert compatible with boardgame Postcards (Pohlednice)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for the game components which fits in the original box.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This insert is my first model, as I am absolute beginner in 3D modeling, so even though I printed this without problem, issues may occur.
It’s nothing fancy, but it speeds up game setup. Some parts have a small round hole on the side for easier card acces. Unfortunately I wasnt able to figure out the measurements for sleeved cards yet. Layout is in the photos, folded game board with rules goes onto the top. As my design lacks lids on top of the trays, it is assumed the game will be stored in horizontal position.
You will need to print :
1 x 01_hracska_deska.stl
1 x 02_pohlednice.stl
1 x 03_znamky.stl
1 x 04_zetony_hracu.stl
1 x 05_karty_cestovani.stl
2 x 06_ostatni_karty_a_zetony_X2.stl
1 x 07_vymezovak.stl
Print tried on my Anycubic Kobra 2 Plus, 0.4 Nozzle, PLA filament.
Unofficial 3D-printable organizer designed for the board game Pohlednice / Postcards.
This is an independent fan-made accessory and is not affiliated with or endorsed by the game’s designers or publishers.
The model contains no original artwork, logos, or other graphic elements from the game.