V2 Tarantula E3D-v6 mount for BLTouch And 3 x 40mm fans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
03/04-19 Update: Added sligtly tweaked parts with M3 screw holes for the fans. And shorter ducts that improve the spread of the cooling air over the part and reduce the risk of them getting warped by the heat from the hotend.
I recommend not printing this in PLA, over time heat can warp the parts.
This is version 2 of my old design https://www.thingiverse.com/thing:2333471
It is more compact and easier to print just flip the cooling fan upside down to avoid supports, I also separated the ducts to remove as many supports as possible.
This fits standard TEVO Tarantula acrylic and mackers X-carriages, the only difference is the mount. For mackers parts It is mounted under the X-carriage and for the standard acrylic is sandwiched between the mount and the cooling fan part.
Has a mount for BLTouch, 27mm offset from the nozzle on Y, Z offset will have to be tweaked between -1 to -1.5mm.
Requires 12x M3 screws in various lengths and some nuts.
Print Settings
Printer:
TEVO Tarantula
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20% or more
Notes:
Use 3 or more perimeters for stronger parts.
Category: 3D Printer Parts