1 / 1
Original Prusa i3 MK3 for Fusion 360(and STL) — zdjęcie 1

Original Prusa i3 MK3 for Fusion 360(and STL)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

v23: discovered that the bearing holes in the Y carriage were over-sized I have corrected them to measurements of my…

Ocena
5 / 5
Polubienia
60
Pobrania
1899
Wydruki
2
Wyświetlenia
5284
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

v23: discovered that the bearing holes in the Y carriage were over-sized I have corrected them to measurements of my own printer.

v22: added holes for the power connection on the heatbed and also chamfers to the 9 mounting holes.

v20: updated frame and Y-carriage since they had some measurements and holes wrong, they they are now made directly from DXF files provided by prusa. Re-organized the Y-axis into moving and stationary sub categories

v16: updated Einsy Base to version R3 with cable clips and raspberry pi access panel

The solidworks file by jzkmath when imported into Fusion 360 was extremely messy and had a couple errors with the Einsy enclosure.

I fixed the Einsy enclosure and removed unnecessary faces from the outside so it looks cleaner, fusion left edges that I don't know how to remove.

I remade the E3D v6 since it wasn't even close to the right dimensions, now it has the dimensions from the official drawings.

I also organized all the parts into assemblies and renamed the parts in a matching format.

STL because thingiverse wouldn't let me publish...

Category: 3D Printers

Tagi