Pittsburg Brand Hex Socket Holder Gridfinity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I don't like the holders that come with the bits from Harbor Freight. So I made my own. For model #67880 bits perfectlly
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I don't like the holders that come with the bits from Harbor Freight. They're always difficult to get my fat fingers on and pull bits off and they hold the bits too tightly. I decided to just create my own. This one fits the model #67880 bits perfectly and only takes up a 5x2 space on a standard Gridfinity base plate.
I printed it in PLA, but depending on how hot your work area gets, you might consider changing that to PETG.
I used lightning infill to save some time and filament because it doesn't really need a ton of interior strength. Change this if you feel like it.