LAUFEN CADA / Pro S Shower Siphon Removal Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handy tool to easily remove the siphon (H2901830000001) from LAUFEN CADA or Pro S shower trays for quick cleaning
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
This small helper tool is designed to make removing the siphon from a LAUFEN CADA or Laufen Pro S shower tray effortless. If you struggle to pull out the tight-fitting siphon components (part number: H2901830000001) for regular maintenance and cleaning, this tool provides the necessary leverage and grip to pop it right out.
Assembly
No assembly required. The tool prints as a single solid piece and is ready to use straight off the build plate.
Print Settings
Orientation: Place flat on the print bed to ensure the layer lines run parallel to the pulling force, maximizing the part's strength.
Infill: 15-20%
To ensure the small part remains incredibly rigid under pulling stress, set your slicer to use 5 perimeters/wall loops.
Material
PETG and PLA should be fine for this application.
Onshape Link: https://cad.onshape.com/documents/88301524df031ab3fc36e78e/w/70913f4703ad89f67f663e2b/e/1899cbb2b0715913ce363bc8?renderMode=0&uiState=6a6d0a4df86a65149ec7a1b4