1 / 3
Lucky Goldstar Microwave Oven Door Handle — zdjęcie 1
1 / 3

Lucky Goldstar Microwave Oven Door Handle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Reinforced Replacement Microwave Door Handle (MEB41908101) for LG (or Kenmore) units

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

Reinforced Replacement Microwave Door Handle (MEB41908101) for LG (or Kenmore) units

This is a reinforced replacement for microwave door handle MEB41908101. The original handle is prone to cracking around the mounting points, and OEM replacements are often expensive while offering no improvement in durability. This replacement was designed to be stronger than the original while maintaining the original mounting dimensions for an easy installation.

Features

  • Replacement for part MEB41908101

  • Reinforced design for improved strength and longevity

  • Suggest 70% infill around the mounting screw holes to strengthen the area where the original handle most commonly fails

  • Direct replacement using the original mounting hardware

  • Optimized for printing in PETG

Recommended Print Settings

  • Material: PETG

  • Nozzle: 0.4 mm

  • Layer Height: 0.12 mm

  • Walls: 5

  • Global Infill: 40% Gyroid

  • Local Infill: 70% around the screw bosses (included in the provided print profile)

  • Print in the supplied orientation with supports for two bosses.

Installation

Transfer the original mounting screws to the new handle and tighten until snug. Avoid overtightening, as excessive force can damage any plastic component.

Notes

The increased local infill around the mounting bosses reinforces the highest-stress area without significantly increasing print time or filament usage. Combined with PETG's toughness and heat resistance, this results in a replacement handle that should outlast the original.

 

If this model saves you from purchasing an expensive OEM replacement, I'd appreciate a like, download, or rating. Happy printing!

Tagi