1 / 4
Losi Nascar Mylaps RC4 Transponder Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount i made for my Losi Nascar chassis.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a mount i made and have been using for the Mylaps RC4 Transponder i use on my Losi Nascar chassis. I used 2x M2.5x10mm screws to install it into the existing holes on the front splitter. the transponder fits great and is not to snug to where you can't pull it out if you need to change transponder to another car in between races but it is snug enough where i has not fallen out on its own.
I printed this in PLA with no supports.