Leopard Offset Midplate for VTX Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An improvised plate to attach the VTX transmitter and ELRS to when your camera cable is too short
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
When I first settled on this design, I bought most of the parts listed, but didn't appreciate just how "efficient" in length all wiring seems to be in this particular hobby. I could solder extensions onto most of the other things, but the camera cable on my Walksnail Ascent VTX with its particularly dainty and thin cable is not something I felt should be messed with. This part provides another means to secure a VTX or ELRS board that can't quite reach the dedicated VTX stack position on the bottom plate.
Attached is the CAD file with ProgrammaDan's STEP file. The sketch the part is made from references and derives from his model.
DISCLAIMER: I have only modeled this part. I discovered that I installed the arms backward, so unless I de-solder and reassemble all the motor arms and re-assign motor positions and directions, I won't be testing it. (presently no plans, but if a crash necessitates it, I will) It isn't a print that takes much material, so if you do test it on my behalf, give me some feedback and I will adjust the model if you don't have the CAD skills.