God of War Draupnir Spear - Spear Head Enforcement / Extension Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added reinforcement to the spearhead with pegs as well as lengthened spear segments.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
I really liked the model of the Draupnir spear made by Vector Works. But I too thought that the spear head could potentially be reinforced a little rather than just flush connections for the pieces. I added some pegs for the top 3 pieces of the spear head, with the recesses being slightly larger than the pegs so it should fit nicely. This should make the connection between these pieces a good bit stronger and simply help line them up.
I also added a piece where the top two spear parts are connected into one larger piece if your printer can handle something that tall.
I did not in any way make this beautiful model; all credit to VectorWorks. I just spliced it up and added some pegs.
Update: 8-2-26
I went in and combined pieces:
1, 2, and 3
4 and 5
6 and 7...
8 and 9
10 and 11 with the added pegs
Then 12 and 13, which I already had combined
For printers that can handle the larger size, this makes fewer pieces and fewer stress points.