1 / 1
BTT ViViD PTFE Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits BTT ViViD PTFE Tube
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 61
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I lost a few clips when shuffling the unit around, was faster to reprint them than to find them.
Prints fine at 0.2 layer height, I recommend 0.16 though.
Recommend PETG or another material with a bit of give to it. PLA might just snap.
