MK3 Skoda octavia center console phone/coin caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A caddy for the center console of the MK3 skoda octavia.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MK3 Skoda Octavia Center Console Phone Holder/Caddy.
What it is and why i made it.
I designed this model for my mk3 skoda octavia cupholder to hold my S25 ultra.I designed it with dimensions to fit snuggly into the cupholder and the size of the s25 ultra with spigen case(approximately 87.5x23x56mm (LxWxH).If you wish to use this on a different phone you can just edit it to the right size either in CAD or add some cushioning.
Recommended Print settings.
This is being used in a car and cars (especially in direct sunlight/on a warm summers day) Get quite warm internally so print it with a material which can withstand such materials.PETG is possible if you live in a cooler climate but something more resistant is more ideal.I did it in anycubic ASA.I also used 8 wall loops to keep it sturdy.Infill wise i did 20% gyroid which sounds really low but is more than enough.Print it with the thinnest part on the bed and use supports.You can do it with the top down which would use less support material but then the texture of your bed is on the top and the supports would be a nightmare in the coin holes.
Added notes.
This was a model i made for myself but if you want it adapted for a different phone just comment and ill adapt.In terms of the logo there is currently a logoless one,One with text only ,and one with the skoda text and logo.I do not own the skoda logo and am using it on the model under CC BY-NC-SA.Meaning you may remix it but cannot gain financially or reupload without attributon.Apart from that.Happy printing and comment if you want it modified.
The Text only and unbranded seems to show the logo in the 3d viewer but when youve sliced it it doesnt,No clue why but it doesnt effect the usage so just a small inconvenience to live with.