Dog Treat Bento Box

If you’re like me, you’ll surely have four or five different types of treats for your dog at home. Don’t worry, now you can organize them all and forget about that bunch of plastic bags!

This dog treat case inspired by bento boxes:

• It has a modular design. You can print as many layers as you need!

• It is designed so that each layer is coupled with the others with 6x3mm magnets

• Available containers with one or two dividers, ideal for storing smaller prizes, as well as a container without any splitter for larger or elongated candy.

• It is fully customizable! The .3mf project allows you to customize it with the text you want, but you also have the lid available with or without title.

• You don't need AMS. If you want to try mixing colors, you can schedule pauses for printing.

Printing parameters

The .3mf project has these parameters configured, although if you prefer to configure them, this is what I recommend:

• Infill: I recommend 10%, although you can upload it if you need it.

• XY-hole-compensation: minimum 0.2mm, although it will depend on your printer.

• XY-contour-compensation: also 0.2mm.

• No supports

Materials needed

• Filament: I recommend using food-friendly filaments or sealing the containers with epoxy resin or food safe varnish. Another option can be wrapping the interior of the containers with plastic bag or film.

• You will need 6x3mm magnets (although 5x3mm can also work). Namely, 4 for the bottom container, 8 for each intermediate layer, and another 4 for the lid.

• Super glue (cyanoacrylate) to glue the magnets.

Did you like this model?

If you liked this or any of my models, you can support me by inviting me to a tea cup on Kofi: https://ko-fi.com/anagf