1 / 2
End for cable Microfit 3x2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
End for cable Microfit 3x2
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
You don't need to use any supports to print it.
To get the MicroFit connector 👉
I printed it with these parameters:
- 0,2 mm layers height
- 6 walls
- 30 % infill
Please give it a 💖 if you like it 🥰
My video about it: