Makita 1900B Power Planer Vacuum Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a Makita 1900B Power Planer that is 30 years old, it's hard to find a vacuum attachment for the outlet port. So…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 135
- Wydruki
- 1
- Wyświetlenia
- 754
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I have a Makita 1900B Power Planer that is 30 years old, it's hard to find a vacuum attachment for the outlet port. So I used Tinkercad and cobbled something together. It works but you can't remove huge chips of material or it can clog but hey it's better than nothing.
I'm using it mostly for shaping surfboards so the material I'm removing is foam.
I also included a loop so a wire or zip tie can be used to loop around the tightening knob to just for some extra reinforcement but I find the screw holds just fine.
Hope this helps someone with this power planer.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
100%
Filament:
Any PLA+
Notes:
Print it with supports touching the build plate.
Category: Machine Tools