Forager Keyboard Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d printable legs for Forager without need to disassemble keyboard to add magnetic feature
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Forager Keyboard Legs (Pin-Free, Magnet-Optional)
This model contains two printable legs designed for the Forager keyboard.
Why this exists: The original legs require pins that are difficult to source in Europe, and even specialist suppliers don't stock the exact specifications needed. Additionally, the original design requires disassembling the keyboard to install magnets — straightforward if you're building from scratch, but inconvenient if you're working with a pre-built keyboard (my keyboard came from pandakb assembled).
What's different: These legs are fully printable, with no pins required. There's an optional cavity for a magnet (dimensions are 8x4x1mm, the one's I purchased are here, I used super glue and put 2 magnets in each hole not one ), which attaches externally onto the screw — no keyboard disassembly needed. Also purchased these rubber feet (as the original suggest).
Since the Forager is a split keyboard, simply mirror both legs to print the set for the other half.