Optimus Prime
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Optimus Prime
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hueforges can be resized, only change the X and Y scale, leave the Z height the same.
Optimus Prime
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x133.33mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.84mm
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA+ Sunlu Blue Transmission Distance: 5
PLA+ Esun Light Blue Transmission Distance: 4.8
PLA BambuLab Basic Red Transmission Distance: 4
PLA Elegoo White Transmission Distance: 5
This print uses 5 unique filaments
5 colors
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #9 (0.8mm) swap to Light Blue
At layer #10 (0.88mm) swap to Red
At layer #15 (1.28mm) swap to White for the rest or
4 colors
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #10 (0.88mm) swap to Red
At layer #15 (1.28mm) swap to White for the rest or
Border Only Colors.
At layer #23 (1.92mm) swap to Red or any color for the rest.
If you have any requests on a new Hueforge, feel free to ask — I’ll see what I can do!