Wingspan Pocket Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of trays for the Wingspan Pocket game
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 136
- Wydruki
- 1
- Wyświetlenia
- 1056
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
This is an organizer for Wingspan Pocket. It includes:
Four small trays for the card stacks
a single discard tray (that holds the stacks in storage)
Egg container
small tray to hold the nest cards, goal board and first player card (doubles as a lid for the eggs)
base that holds the feather tokens, goal cards and automa cards
It does not support sleeved cards.
An optional small tray model is included to support a 20x4x1 magnet so the trays can gently snap together on the table. I used https://www.amazon.com/dp/B08S7Q5C3Q
If inserting magnets, pause the print at 7.8 mm and firmly insert the magnets, making sure that the polarity of all the magnets match. Make sure that the magnets are completely flush and make sure the magnets aren't attracted to the print head. See an online guide on embedding magnets in 3d prints before doing this.