1 / 1
Top Feed Spool Holder - Adventurer 5M Minimal Enclosure — zdjęcie 1

Top Feed Spool Holder - Adventurer 5M Minimal Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A top-feed filament holder for the Flashforge Adventurer 5M using design8studio's minimal enclosure.

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
98
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of HugoG's Filler - Filament Holder as a top-feed spool holder for an Adventurer 5m using design8studio's minimal enclosure.

  • x2 608 bearings are needed.

  • 6801 bearings version available here: https://www.printables.com/model/1797211-filler-filament-holder-6801-bearings

  • Printed in eSun PLA+, 0.6mm nozzle, 0.3mm layer height, 2-wall thickness, 15% infill.

  • Fits on a 220x220 buildplate.

  • Supports needed for the slot (2 interface layers, 0.3mm top+bottom z-distance, 1.2mm top+bottom interface spacing, 0.5mm XY distance_:

The spool holder is meant to sit on the printe's metal frame, flush between the edge of the frame and the enclosure's inner edge. It can be slid back and forth and has about 3cm of clearance from the top of the printhead.

Tagi