1€ (one euro) coin coaster/toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 1€ coin coaster or toy. I printed it using lightning infill at 10%, which is why the silver part doesn’t…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 1€ coin coaster or toy.
I printed it using lightning infill at 10%, which is why the silver part doesn’t look as good as it should. I’ve updated the slicer project, so it should print properly for you.
Since I have a lot of gold filament and nothing specific to use it for, I printed most of the coin in gold and only used silver where needed. You can change this in the slicer if you prefer a different setup.
This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different printer or slicer, import the 3MF as a model only to avoid incompatible printer settings.