1 / 2
Shark Vacuum Cord Holder Rejuvenator / Stiffener
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A piece to make the power cord holder for a shark vacuum stay in position
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
The power cord wrap holder on my vacuum became limp. The ratcheting part ended up being bent out of place. I made this to force the ratcheting parts back in place
To install, use a T15H security bit to remove the screw and cover on the hook. Squeeze the part into the hole with the flats behind the ratcheting pieces. Reassemble.
