1 / 6
Height adjustable TV repair magnetic stand (used while replacing backlight LEDs) — zdjęcie 1
1 / 6

Height adjustable TV repair magnetic stand (used while replacing backlight LEDs)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

When replacing the backlight LEDs on an LCD screen, you first have to remove the back of the TV to disconnect the…

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

When replacing the backlight LEDs on an LCD screen, you first have to remove the back of the TV to disconnect the panel. After that, you need to lay it flat on its back in order to remove the screen. With these stands, you can place the TV level on your workbench without damaging the boards.

This type of stand is also commercially available: https://s.click.aliexpress.com/e/_c2yJrmwP. The advantage of my version over the commercially available ones is the lower price, greater sturdiness, and the fact that the height is adjustable.

There is a window and markings on the base so you can easily match the height across multiple stands.
 

At least four stands are needed for one TV. You also need four 20 mm circular magnets with a hole, like these: https://s.click.aliexpress.com/e/_c3n8CbWL or on amazon https://amzn.to/49gdt04, and four M4 up to 15mm long wood screws.

This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different printer or slicer, import the 3MF as a model only to avoid incompatible printer settings.

Tagi