Central Heating Vent Tool Broomstick Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool to open/close central heating vents that fits on broomstick
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was sick of having to get up on a ladder every time I needed to open/close the gas heating vents in my house, and was told to just shove a broomstick up there and it'd do the trick.
It did not do the trick.
Mixed these two models together and voila, all fixed.
You may need to use something to stop the whole adapter from rotating loose from the broomstick, for now I have used PTFE/plumber's tape as I may wish to detach the adapter and use the stick for other purposes.
Arguably should be able to print without supports (the Broom Handle Adapter from LoboCNC has an inbuilt support that is removed easily), but there was still a little unsupported material inside - exterior printed fine, so we're all good.
Whilst I printed in PETG 2 walls 15% gyroid infill, I don't expect you to need to follow this religiously.