1 / 8
Corner mount for Tapo D230S1 doorbell camera
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner mount for Tapo D230S1 doorbell camera
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
I wanted a mount to angle the doorbell camera more and also to make it harder to steal.
I've included a plain version of the mount and the version that was modified to fit the weatherboards etc on my house (there's a photo showing the measured dimensions). The Freecad model is also included so you can modify it to suit.
A longer pin will be required to remove the camera as will the removal hook.
It would look nicer if it was printed with the camera side facing up but it would need more supports and I was in a rush.
Here's a short timelapse: