Playseat challange X (and non-x) - Simjack handbrake mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simjack handbrake (HE002) mount for playseat challange X
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- GNU General Public License v2.0
Playseat challange x (should work for standard version also) mount for simjack handbrake HE002
This remix also allow to use shorter screws than original - now you can use M4x20 or M4x16
For mounting it to playseat challange you will need:
- 8 x M4 nuts
- 8 x M4x16 screw or 7 x M4x20 and 1 x M4x16 (shorter one should goes in hole with M8 nut)
For mounting handbrake to mount you will need:
- 4x M8 nut
- 4x M8 screw - at least 10mm long, i recommend 15 or 20mm
This design has 2 minor flaws:
- Handbrake has almost zero ability to set it higher or lower, but it is in perfect position imo
- playseat now will cannot fold to its narrower position, because handbrake will be touching seat frame - it will be a little bit wider when stored, on photo it is in the most narrow position
Cad files included - mostly, it just a STL converted to solid
Front mount will have a standard version and reinforced one - i cannot add reinforcment to one CAD file because i was getting "null shape" in freecad everytime when i try to pad a sketch, so i was forced to create another STL conversion to solid and then add reinforcment...
My print settings (Ender 3 pro)
- PETG
- 30% infill
- 0.6 nozzle
- 3 perimeters