1 / 3
Bracket to hold air assist pump for the K40 laser cutter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket allows you to mount an air assist pump (~36mm diameter, https://s.click.aliexpress.com/e/_c4KHlqmx) to…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This bracket allows you to mount an air assist pump (~36mm diameter, https://s.click.aliexpress.com/e/_c4KHlqmx) to the side vents of the K40 CO2 laser cutter.
It is designed to be used with foam tape between the bracket and the motor. You can mount it with fan rubber feet (https://s.click.aliexpress.com/e/_c43RKXyx) to the side vents of the k40.
Requires 2x 10mm M3 screws and nuts.