Optocoupler tester enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an enclosure for a V5 optocoupler tester like this https://s.click.aliexpress.com/e/_c2xxZmD1 This is a very…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an enclosure for a V5 optocoupler tester like this https://s.click.aliexpress.com/e/_c2xxZmD1
This is a very useful tool to quickly check if optocouplers are in working condition. If the LED marked with T flashes, the optocoupler is working, if it stays off or permanently on the optocoupler is bad.
If you do not own a multi filament printer you can remove all the bodies in your slicer except the ones named top and bottom so the letters get recessed instead (0.4mm).
This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different printer or slicer, import the 3MF as a model only to avoid incompatible printer settings.