1 / 5
Battery Box for Hybrid Armory Mosquito MK1 — zdjęcie 1
1 / 5

Battery Box for Hybrid Armory Mosquito MK1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Battery box designed to replace one of the short side rails, giving another option for battery placement

Ocena
0 / 5
Polubienia
3
Pobrania
2
Wydruki
0
Wyświetlenia
124
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial

I wanted to minimize the overall footprint on my own Mosquito MK1 build, so I thought it would be fun to model a battery compartment to go on the side of the hand guard in place of one of the optional side rails. No additional hardware is required, and the battery can be installed and removed with no tools as the lid is a snap fit! 

Parts are oriented in a way that eliminates any need for support, but depending on the material choice it may not be optimal for part strength. I printed mine in PETG to give some flex to the lid and reduce likelihood of breaking it when removing it and re-installing it. Simply use the originally specified M3x10mm SHCS bolts and install in place of a side rail, then the wiring can be inserted through the existing cutout on the hand guard.

Please note that some deans connectors (including the one that came installed on my ETU) have raised lettering on the side of the connector which can keep the connector from fitting in the cutout. I used an Xacto knife and removed the letters from the wider portion of the connector and now it fits with no issues. Standard red deans connectors fit with no issues. 

I designed this to fit a battery with the following dimensions: 75mm length, 33mm width, 19mm height. Anything this size or smaller should fit with no problems. 

If you decide to print this part please add a make to the page so I can see it on your builds!