Zotac Solid RTX5080 deshroud and 140mm fan conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapters to allow 140mm fans to be fitted to a Zotac Solid RTX5080 to improve cooling and noise.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I wasn't happy with the cooling performance and noise of my GPU, so decided to de-shroud and fit 2x Noctua 140mm fans.
Removal of the shroud is slightly tricky due to 2x screws hidden behind the main board.
Noise is now much lower and cooling has massively improved.
Use the original 6x screws to mount the adapters to the GPU. The fans can be mounted with nut and bolt or cable ties, but I added heat inserts.
I would recommend printing in ASA or ABS due to heat from the GPU.
Split into separate parts in slicer.