Graded Slab Fit Gauge - PSA / CGC / BGS card case sizing tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 28-minute test print that tells you which graded slab rack size fits your card cases.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A 28-minute test print that tells you whether your graded card cases fit a standard slot - before you commit to a long print.
Graded case thickness varies between generations by roughly 0.5 mm. Most racks are designed around a single number, so older or newer cases sometimes will not seat. This gauge has two slots so you can just try yours:
1 dot - 7.30 mm slot - the snug size (typical PSA)
2 dots - 8.80 mm slot - the wide size (typical CGC / BGS)
Drop a slab in. Whichever slot holds it without forcing is your size.
WHY I MADE IT
I design storage for graded cards parametrically, so I can produce an exact slot for any case size. The one thing code cannot do is measure YOUR cases. This gauge moves that measurement to the person who actually has the slabs.
PRINTING
No supports. Every surface is vertical or horizontal by design.
0.2 mm layers, 0.4 mm nozzle, 3 perimeters, 15% infill.
About 4 g of filament and 28 minutes.
HOW THIS WAS MADE - full disclosure
The geometry is produced by parametric CAD code (build123d / Python) that I developed with AI assistance, which is why this is labelled AI-assisted. What that does NOT mean: there is no text-to-3D, no AI mesh generation, no scraped or remixed geometry. The output is deterministic - the same script with the same parameters reproduces byte-identical files - and every dimension traces back to published case specifications. Each model is checked automatically for manifold errors, wall thickness, overhangs and bed fit, then test-sliced, before it is published.
FEEDBACK WANTED - this is the whole point
If you print it, please post a make and tell me:
- which grader your slabs are from (PSA / CGC / BGS / other)
- which slot fit best, and whether it was loose, snug or tight
I will use that to tune the full rack sizes. Genuinely useful to me, and it makes the racks better for everyone.