Foqos Block (Brick alternative)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop phone addiction and doomscrolling with this Foqos-compatible, printable block with an embedded NFC tag
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
Struggling with phone addiction and just scrolling endlessly?
Here's a 3D printable NFC block (similar to getbrick.com but a lot cheaper) designed to work with the brilliant, free, open-source, privacy-respecting app Foqos.
Can work with or without magnets (20x7mm exactly), and comes in varying versions, along with the original files should you want to make your own.
I use these magnets:
https://www.amazon.co.uk/dp/B0D948GL4W
and these NFC stickers
https://www.amazon.co.uk/dp/B077TBGQ7P
It requires you to pause the print mid-way through. I've added Bambu A1 printer profiles (.3mf files in the download section) with this pause already embedded, but you may need to adjust this yourself if you're using other printers.
Tips
I recommend letting the print cool down before trying to remove the back plate, and to do so carefully to avoid bending.
The magnets and back plate are designed to be a tight push-fit, but magnet sizes can vary a little so you may need to adjust the model if they don't fit well. It was designed for magnets 20x7mm exactly.
On the magnet version, try to push all four pins of the back plate in at the same time with a quick firm press.
3M heavy duty tape with the non-magnet version also works well.
I often set my first layer on my projects much slower to get a nicer finish, using these settings under the speed tab of my slicer: First layer: 20mm/s. First layer infill: 40mm/s.
On Foqos, mine is set to lock every night at 9pm and not unlock again until 10am the next day, unless I can be bothered to get up and go scan the NFC chip. It's surprising how much difference a small amount of resistance makes.