Morelia Cathedral - Michoacan, Mexico
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🇲🇽 Detailed model of the 18th century cathedral in western Mexico. No supports.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🇲🇽 ¡Bienvenidos a Morelia!
Welcome to Morelia!
AVISO: vender los archivos o impresiones físicas de este modelo está prohibido por licencia. Solamente los suscriptores a nuestro programa de Revendedor Oficial lo tienen permitido.
Evita una suspensión de tu tienda en línea si se te reporta infringiendo.
NOTICE: Selling the files or physical prints of this model is forbidden by license. Only subscribers of our Reseller Program are allowed commercial uses.
Avoid a suspension or closing of your online shop if reported and caught infringing.
This model was created by Artemio García.
The Metropolitan Cathedral of Morelia (Spanish: Catedral Metropolitana de Morelia (San Salvador)) is a religious site and seat of the Archdiocese of Morelia of the Catholic church in Mexico. It is located in the city of Morelia, capital of the state of Michoacán, Mexico. Finished in the 18th century at the time of the viceroyalty, it is Baroque in style and is made of pink stone that gives it a peculiar and characteristic color.
Its towers are 68 m (223 ft) tall and overall has similar appearances to the cathedrals of Puebla and Mexico City. It is the only cathedral in Mexico that faces north instead of south (from Wikipedia).
MiniWorld3D is happy to bring this historical model to life as a homage to the people of Morelia. Please give credit, it's all about spreading culture!
If you appreciate our work and if you'd like to have a license to sell prints of this, please join our Printables Club or Patreon!
printables.com/@MiniWorld3D
patreon.com/MiniWorld3D
Find all our profiles, YouTube channel & social media on:
Join our 40K followers on IG!
MiniWorld3D is building the best catalog of 3D printable models of landmarks of the world since 2014. More than 70 designers and 3D artists have contributed.
Image credits: printed by Dany Sánchez in Cairo Gold extrafill PLA by Fillamentum on a Prusa MK4.
Printing Tips
No supports. There are some overhangs and bridges, but modern printers with high speeds, input shaper and good cooling can handle them fine. Adding supports could not improve anything and instead add difficulty and print time/material.
Infill 15% , lightning pattern ok.
There are two versions, complete and trimmed. The latter omits the back part and side buildings that aren't part of the main cross floor plan for faster printing and fitting better on a print plate if scaling up.