1 / 5
Gridfinity Starter Set - 9 Bins and a Baseplate — zdjęcie 1
1 / 5

Gridfinity Starter Set - 9 Bins and a Baseplate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nine parametric Gridfinity bin sizes plus a 4x3 baseplate, as one download.

Ocena
1 / 5
Polubienia
1
Pobrania
11
Wydruki
1
Wyświetlenia
45
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

A complete Gridfinity starter set: nine bin sizes and a 4x3 baseplate to drop them into.

Every size in this set comes from one parametric definition, so the wall thickness, floor and base profile are identical across the whole family. They stack and interchange because they share that definition, rather than being ten models drawn separately by hand.

WHAT IS IN THE SET

  • bin 1x1x3 - 41.5 x 41.5 x 25.3 mm, ~10 g

  • bin 1x1x6 - 41.5 x 41.5 x 46.3 mm, ~16 g

  • bin 1x2x3 - 41.5 x 83.5 x 25.3 mm, ~17 g

  • bin 1x2x6 - 41.5 x 83.5 x 46.3 mm, ~26 g

  • bin 2x2x3 - 83.5 x 83.5 x 25.3 mm, ~26 g

  • bin 2x3x3 - 83.5 x 125.5 x 25.3 mm, ~35 g

  • bin 2x2x6 - 83.5 x 83.5 x 46.3 mm, ~39 g

  • bin 2x2x6 with 2x2 dividers - 83.5 x 83.5 x 46.3 mm, ~61 g

  • bin 2x3x6 - 83.5 x 125.5 x 46.3 mm, ~52 g

  • baseplate 4x3 - 168.0 x 126.0 x 4.7 mm, ~20 g

Heights include the stacking lip, which sits on top of the 7 mm height units rather than inside them - so a 6u bin is 42 mm of body plus the lip. Stacked bins settle 0.35 mm into the one below, so each 6u bin adds 41.65 mm to a stack.

The bins are shells with an open underside, like the original Gridfinity bins, so the whole set is about 300 g - three complete sets from a 1 kg spool.

Every part fits a 180 x 180 mm bed, so an A1 mini or a Prusa MINI prints the whole set. Baseplates tile on the 42 mm grid, so print as many as your bed allows and butt them together.

PRINTING

No supports. Everything prints base-down as-is.

  • Layer height: 0.2 mm

  • Walls: 4

  • Top/bottom layers: 4

  • Infill: 15%

  • Material: PLA

NOTES

Wall thickness is 1.6 mm and the floor is 1.2 mm, constant across every size - four perimeters at a 0.4 mm nozzle. These are thicker than most Gridfinity bins on purpose; they are meant to be picked up full.

Clearances follow the standard: 0.25 mm per side against a baseplate socket wall, 0.35 mm at the socket floor. All meshes are watertight and manifold, checked before upload.

If you want a size that is not in this set, say so in the comments and I will add it.

Tagi