Ranked Choice Voting

You can download the stand here. https://www.printables.com/model/1063406-sign-stand

PrusaSlicer

2.9.6 (Expert Mode)

Filaments

• Cooling

  • Cooling Slowdown logic - Consistent Surface

Print Settings

• Layers and Perimeters

  • Layer Height - .2

  • Perimeters – 2

  • Minimum Shell Thickness Top and Bottom – 2mm

  • Extra Perimeters on Overhangs - Turn On

  • Single Perimeter on Top Surfaces - All Top Surfaces

  • Seam Position – Aligned - On the sign without a hanger there's a small notch on the bottom. If Aligned doesn't put the Seam there you might have to paint it on. 

• Infill

  • Top Fill Pattern – Monotonic Lines

  • Bottom Fill Pattern – Monotonic

  • Fill Angle - 90

• Skirt and Brim (Sign with Hanger)

  • Brim Type – Inner brim only

  • Brim Width - 4mm

  • Brim Separation Gap - 0.1

Wipe Cylinder 

Add Settings - Layers and Perimeters

• Bottom Solid Layers - 1

• Top Solid Layers - 0

• Minimum Bottom Shell Thickness - 0

• Perimeters - 1

• Layer Height - 0.2

Add Settings – Infill

• Fill Density - 0%

• Bottom Fill Pattern - Monotonic

Add Settings - Skirt and Brim

• Brim Separation Gap - 0

• Brim Type - Outer Brim Only

• Brim Width - 1mm

Signs

Color change at 2.2mm

The text is 0.1mm above the sign. I do this because I think the top of the sign looks better if you print it this way.

If you don’t like my settings and you think you have better ones let me know. I’m always looking for better ways to print things.

If you have any questions, just ask.

Please post pictures!!!

Filament used in the picture

• Prusa PLA Marble Grey and Galaxy Black