1 / 3
Foldable Gear Fidget Toy / Print-in-Place Test Print
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When print-in-place meets gears, this is what happens 😊 Toy, fidget or test print.
- Ocena
- 4,875 / 5
- Polubienia
- 555
- Pobrania
- 2311
- Wydruki
- 25
- Wyświetlenia
- 9676
- Oceny
- 24
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 25) (Komentarze: 32)Remiksy (0)Kolekcje (637)Powiązane
Foldable Gear Fidget with Hand Crank
Toy, fidget or test print with decent tolerances > try to scale it down to test your printers calibration. For perfect motion add a drop of oil into the gaps around the 4 gears/wheels.
Printing
Tested with PETG and PLA, 0.4 nozzle, 0.2 layer height, common settings
Seam position > random recommended (for easier turning)
Don't use support or brim (would be hard to remove)