Pipe/Hose coupler – Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This very simple design couples two round objects to each other, like pipes or hoses. Fully parametric in OnShape.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Threw that up in a few minutes as I wanted to mount a hose to a vertical pipe in the bathroom.
As it wasn't much effort, made the OnShape document fully parametric:
https://cad.onshape.com/documents/0006c8cd28298de63c5252ef/w/9d67eb10583830c88a58ccd5/e/4353c85f4b8736bbe7628a69?configuration=List_0p2OoS6waXiFGE%3DDefault&renderMode=0&rightPanel=configPanel&uiState=6a6f355cee99ff31d14fe247
Please note that the specified radius includes the wall thickness. In the default that's 16 + 3 = 19 mm and 7.5 + 3 = 10.5 mm, where 16 and 7.5 are the actually desired radii, equal to 32 mm and 15 mm diameters respectively.
Sample print is 3 walls Prusament White PETG with minimal support and a brim.