LayersFactory
Zgłoś model
1 / 4
Elsa Frozen Lightbox — zdjęcie 1
1 / 4

Elsa Frozen Lightbox

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nick3d

Nick3d

@Nick3d_3841577

Lightbox

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
30
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (2)Powiązane

✨ Want to sell my designs? Subscribe to my Patreon to get a commercial license.

☕ Or, if you'd like, buy me a coffee to support my projects!

Bring the magic of Arendelle to life with this Elsa Lightbox Lamp! ❄✨

This model is designed as a clean, vibrant 3D lightbox that works as a nightlight or desk decoration. The multi-colored front panel highlights Elsa's iconic braid and blue dress, creating a stunning glow when illuminated from behind.

💡 Features:

  • Easy Multi-Color Printing: Optimized for AMS / multi-material systems (no manual color swap needed if using AMS).

  • Crisp Lines & High Contrast: Black outlines separate the colors cleanly, preventing light bleed between sections.

  • Custom LED Lighting: Designed to fit standard 12V or 5V LED strips inside the housing.

  • Great Nightlight: Soft ambient lighting, perfect for kids' rooms, gaming setups, or Disney fans.

🛠 Print Settings & Recommendations (Impostazioni di Stampa)

  • Nozzle Size: 0.4 mm (0.2 mm nozzle recommended for crisp outline details if scaling down)

  • Layer Height: 0.2 mm (first layer 0.2 mm)

  • Infill: 100% on the colored front plate / 15-20% Grid or Gyroid on the back housing frame

  • Supports: Not needed / None

  • Brim: Not necessary but Recommended for the outer frame to prevent corner warping

  • Wall Loops: 3 walls for the frame shell

🔌 Assembly & Wiring Guide (Guida al Montaggio e Cablaggio)

  1. Front Panel: Print face-down on a textured or smooth PEI sheet for the best surface finish.

  2. Back Housing: Print in black or opaque filament to prevent light leaks on the sides.

  3. LED Strip Installation: Cut a strip of LED (5V USB or 12V DC) to fit around the inner perimeter of the back box. Stick it firmly inside using the adhesive backing.

  4. Soldering & Wiring: Pass the power cable/USB wire through the designated cable hole at the bottom/back. Solder the positive (+) and negative (-) wires directly to the LED strip contact pads (or use quick-connect clips if you prefer). Secure the cable inside with a zip tie or drop of hot glue as a strain relief.

  5. Closing the Lightbox: Snap or glue the front panel onto the back housing frame.


Tagi

leddisneylightboxnightlightelsalightboxledforzen