MK3/MK3S+ LCD screen cover with ETR/ETC window
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LCD screen cover for the MK3/MK3S/MK3S+, but with a window to allow a quick look at the estimated time remaining (ETR).
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 113
- Wydruki
- 4
- Wyświetlenia
- 443
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE 2022-05-27: Updated version here - v1.1. Slightly larger knob and room for a small magnet so you can more easily keep track of it.
Simple LCD cover inspired by others available, but with a small window to view the estimated time remaining (ETR) or ETC (est. time until filament change). I'm typically looking down on my printer, so there's a slight angled cutout so I can see the ETR/ETC without the cover thickness blocking my view.
Sure, the other info is good to know, but my temps are usually pretty steady and while printing, the only thing I really want to know is when its going to be done. :)
Printed in PLA, .2mm layer height, 20% infill.