Stick Cam Mount for Radiomaster TX15, TX16S MK3 and GX12
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stick Cam GoPro Mount for Radiomaster TX15, TX16S MK3 and GX12. Or any other future radios with M3, 52mm screw holes
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Features
Fits perfectly for anything with a GoPro mount
Great overall stiffness to prevent shaky footage
Fits nicely inside your carrying case for the radio
Quick-release design - no need to unscrew all the way and have 2 loose screws!
Note: GoPro screw handle placement is now only the right-hand side! If you would like a left-hand version, either mirror it or DM me to customise it.
Shopping List
Item | Qty | Function |
|---|---|---|
M3*8-12 | 2 | To mount it on the radio |
M5 Nyloc nut | 1 | To fix the camera in place |
M5*15-18 Hex screw or M5*15-18 Hex bolt (for fully enclosed method) | 1 | To fix the camera in place |
You may consider printing a handle for the screw, just like a regular GoPro mount screw. For a fully enclosed handle, you can try out this method, which hides the bolt perfectly inside the handle.
Changelog
[03/08/2026] - Added first 5 models - Blank, Radiomaster, weBLEEDfpv, 90er and spectrexFPV
Print Settings

Printer: Bambu Lab P1S
Filament material: Non-Flexible, non-conductive material
Layer height: Default or finer
Wall Ordering: Outside to Inside
Supports: Yes, Tree - Hybrid
Infill: 25%
Infill Pattern: N/A
Nozzle Temp: 220°C
Bed Temp: 45-60°C
Print Speed: 500mm/s
Rafts: Doesn't Matter
Notes: May consider adding a brim