Organizer for N Scale Kato Unitrack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of organizers to sort Kato Unitrack for storage and travel. Keeps 10 pieces together securely/
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
These are a set of organizers meant to hold 10 pieces of track each to allow better organization and storage. I have also found them to be useful if you are taking some track someplace to set up a temporary layout, as it keeps it all together and protects the uni-joiners on the ends.
Each piece has a slot for a hook and loop cable tie to secure track inside.
Additionally there are reliefs cut to allow easier removal of the track
Each is labeled with the track type that fits it, S186 is 186mm Straight, R315-45 is a 315mm radius 45 degree curve, ect.
Specialized track, like power pickups and re-railer tracks also fit, though you wont be able to fit 10 if these are stored.
Currently I have only made ones for single track straights and curves.
The straps I used are the Harbor Freight 10 inch hook and loop cable ties, though others will work as well. https://www.harborfreight.com/10-in-hook-and-loop-cable-ties-20-pack-69074.html
I have printed these on both a Prusa Mk3 and a Core One L with no issues. Both printed fine with zero supports and 5% infill. A 0.4mm nozzle works great, though on some curves the label can be a little hard to read unless a 0.25mm is used.