K3 Style door for Larger Voron with 6x2 N52 Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hel improve closing door for larger printer, Allow using N52 instead of ring magnet.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I love K3 style door but hated that I have to purchase ring magnet. This model allow you to utilize regular 6x2 N52, and because of the 3 additional magnet on the joint side, its also satisfying to open and close.
Please also download the require part from Github Printer-Mods/Voron/K3_Style_Door at main · gdsolar/Printer-Mods · GitHub
For door handle side, Use flat head M3 screw instead of SHCS, simply scew on the handle and pop your magnet into the same socket.
For Arm side, SHCS M3 screw is good.
Push the magnet in and apply glue as needed. (you might be able to push the magnet in without glue with 4 wall loops but I am not sure)
