1 / 5
Terrifier movie logo sign Art the Clown — zdjęcie 1
1 / 5

Terrifier movie logo sign Art the Clown

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Terrifier movie logo sign Art the Clown

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
88
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

I continue to share my horror movie signs (other movie genres will also appear in the future).

Today I invite you to print "Terrifier" movie sign.
Dimensions after printing and connecting:
250x48x15mm
Sign contains two elements: bg and frame

bg

First layer 0.16mm, each subsequent 0.08mm. 
Ironing off
change of filament on layer:
1-16 black
17 red
18-36 white

frame

The frame should be printed with the support option enabled. I used a support for pla from Bambu, but if you don't have one, you can also use PETG as support filament for pla instead.
With the frame, we can speed up a bit and print with a layer height of 0.2 and 0.2mm. You can still print 0.16 and 0.08mm just like the bg part. You have a choice
Here it's up to you whether you want to use ironing. I had it off.

Depending on which brand of filament you use, there may be slightly different shades in your print. 

I printed bg and frame without a brim, but it's up to you.

After printing, wait for the plate to cool down and only then remove the print.
 

Gently press the background (bg) into the frame from the back. A few drops of super glue will definitely come in handy to hold them together.

Tagi