Boxes for miniatures - magnetized and compatible with A1mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Boxes with cutouts for miniatures with most small base sizes. Stackable with 5x2mm magnets.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Boxes with cutouts for miniatures. All boxes are 180mm wide and 90mm deep. The lid is 6mm high.
They all fit on the bambu A1mini and can be printed in place.
There are holes in the bottom and top to insert 5x2mm magnets so they can be stacked or have a lid.
They are stackable without the lid, I suggest only having a lid on the top box.
The front can be fitted with 1mm thick (see-trough) plastic with length 164mm and height 65mm.
The cutouts have a depth of 3mm, so most minis will stay in place during light transport, but I suggest magnetizing these as well.
There are 3 different heights.
LOW for 60mm
MEDIUM for 80mm
TALL for 100mm
25mm: 15 cutouts, LOW or MEDIUM
28mm: 12 cutouts, LOW or MEDIUM
32mm: 10 cutouts, LOW, MEDIUM or TALL
40mm: 7 cutouts, MEDIUM or TALL
50mm, 3 cutouts, TALL
60x35mm ellipse: 4 cutouts, MEDIUM or TALL (will NOT fit models that extent far beyond the base)
-----------------------------------------------------
I also have added boxes for 90mm round and 105*70 oval that I use but these are a far less elegant solution.
They include a tray for a foam insert, the idea being that you can store the base in the cutout and the magnetized model in the tray. They are 120mm high. The 90mm box is deeper and has a custom lid.