1 / 2
Helmet camera chin mount REVISED 8° - Shoei rf 1400 — zdjęcie 1
1 / 2

Helmet camera chin mount REVISED 8° - Shoei rf 1400

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

latest design for helmet mount for camera on Shoei helmet.

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

OK, so after increasing the angle by 3° and then 5°, it was apparent that some people might still need MOAR! so I did 8° and i tightened up the clasp area for the slide in gopro mount so it would not rattle at all. 

use some 3M VHB tape like what comes with gopro mounting plates and youre set! cheers!

I used ASA and ASA CF, 11 perimeters so its solid 0.2 layer height. Other settings might work fine but those are what worked for me. 

Tagi