1 / 7
Sushi Nigiri Earring (3-color salmon nigiri charm) — zdjęcie 1
1 / 7

Sushi Nigiri Earring (3-color salmon nigiri charm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tiny parametric salmon-nigiri sushi earring — textured rice grains, marbled salmon, dark nori strap.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A little salmon-nigiri sushi that hangs from your ear.

Three colors, printed in ONE job on a multi-material printer (Bambu AMS / MMU): a white pressed-rice pillow, a coral salmon slice draped over the top, and a dark nori strap wrapped over the middle. An integral wire loop rises from the top for a jump ring + ear hook.

It is textured like the real thing, not smooth:

  • the rice is built from individual pressed GRAINS — ~84 half-buried grains sitting on the exposed skirt, each one tilted and sized a little differently

  • the salmon carries pale FAT MARBLING across the crown, inlaid as its own solid so you can print the streaks in the white rice filament — actual white fat, not a shadow line. Use an OPAQUE coral/orange for the fish if you want the marbling to show; in the translucent amber of the photos it disappears.

  • the nori strap stands 0.3 mm PROUD and CUTS BOTH TEXTURES DEAD at its edges, so the seaweed really reads as lying on top of the sushi

Prints FLAT on the rice bottom, salmon rests on the rice — no supports needed. Print two for a pair.

How To Print The Colors

Import sushi_nigiri_combined.stl, right-click -> "Split to Parts", then assign filaments: WHITE -> rice, CORAL/ORANGE -> salmon, DARK GREEN/BLACK -> nori, and the SAME WHITE as the rice -> marble. Coordinates stay locked so the colors register perfectly.

Assembly: 0.8 mm jump ring through the loop, then a standard ear hook.

Printed and verified — the photos are the actual print in white, amber and black PLA, straight off the plate with no supports.

Fully parametric OpenSCAD — the .scad is attached; every dimension (rice size, salmon drape, grain size/count, marbling lines, nori strap position, loop) is a variable at the top.

Tagi