Skua
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wind-driven gull scarer: 3D-printed flapping-flag rotor on skateboard bearings, no electronics. Parametric OpenSCAD.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Skua is a wind-driven gull scarer for a boat: a 1.2 m rotor of flapping plastic flags on a plank-mounted bearing tower. The motion and the clatter keep the gulls off. No electronics, no motor, wind only. Printed structure plus 8 mm aluminum rod, two 608 skateboard bearings and a handful of M3/M8 hardware.
The STLs attached here were generated for my printer and filament. Three critical fits are calibrated per printer, so start at the GitHub repo instead: print the gauges, measure your fits, put three numbers into the parameter file, and regenerate the STLs, either with the one-command script or by just opening the part files in OpenSCAD and exporting them manually.
The repo also has the full bill of materials and a step-by-step assembly guide: https://github.com/heavy-oil1462/skua