1 / 22
Rugged Gwent Custom Card Boxes - Horizontal Version — zdjęcie 1
1 / 22

Rugged Gwent Custom Card Boxes - Horizontal Version

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protect your custom cards in rugged colored boxes.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A tough, throw-in-your-bag card case for Gwent decks. This remix combines a single-latch rugged outer shell with a smooth inner tray so your cards ride horizontally, plus clean Gwent-themed lids you can color-swap for easy faction sorting.

What’s included

  • Rugged outer box and single-latch lid

  • Inner tray/insert for horizontal card storage

  • Lid variants: Gwent logo fractions

Features

  • Horizontal storage for tall, narrow Gwent cards

  • One-piece, durable latch you can open with one hand

  • Color-swap-friendly logo for crisp two-tone lids

  • Smooth insert walls for snag-free sleeves

  • No-support printing for all parts on most printers

Sizing & compatibility

  • Designed around 61 × 112 mm cards.

  • Works with common sleeves up to approximately 61 × 112 mm (varies by brand).

  • Fit can vary by printer and sleeve thickness. If needed, adjust XY compensation ±0.1–0.2 mm in your slicer or scale the inner tray 101–102% in X/Y.

Printing recommendations

  • Material: PETG or PLA (PETG for extra toughness; PLA prints clean logos)

  • Layer height: 0.20 mm (0.16 mm for crisper logos)

  • Walls/perimeters: 3–4

  • Top/bottom layers: 4–6

  • Infill: 15–25% (Grid/Gyroid)

  • Supports: none

  • Adhesion: optional 2–4 mm brim for the lid to keep the latch flat

  • Color swap: use a manual filament change at the first logo layer to highlight the emblem

Orientation tips

  • Print the outer box upright, open side down.

  • Print the lid flat with the exterior/logo facing up for best surface quality.

  • Print the insert upright, opening up.

Assembly & fit

  • Press-fit the insert into the outer shell; it should sit snugly. If it’s too tight, lightly sand the outer edges of the insert or increase XY compensation +0.1 mm. If it’s loose, a tiny dot of removable adhesive (or a strip of thin foam) keeps it rattle-free.

  • Gently flex the latch the first few times; avoid over-bending.

Notes, license, and trademarks

  • This is a fan-made remix for personal use. Gwent and related logos are trademarks of CD PROJEKT. All rights to those marks remain with their respective owners.

  • Please credit the original creators if you further remix this. Links above.

Suggestions

  • Print different colors per faction for quick deck ID.

  • Use a blank lid to add your own emblem or a custom label.

If you print this, I’d love to see your make! Feedback on fit (especially with different sleeve brands) helps improve future updates. 🎴🧰🔒

Tagi