1 / 2
Volvo P2 Chassis M56 Manual Transmission Adapter to M18 Thread — zdjęcie 1
1 / 2

Volvo P2 Chassis M56 Manual Transmission Adapter to M18 Thread

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

To convert from the stock knob to any knob with an M18x1.50 thread pitch.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
73
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

Couldn't find anything to put a different shift knob on my P2-generation Volvo with the M56 Manual Transmission, so I made one. Recommend a drop of super glue or something if you want to make it a perfect fit, but it's darn tight as is.

Included a slug in the print in case you want to make something like a crazy shift knob, you can use the separate slug to make a negative in your print and you can have a whatever crazy design you come up with. 

It's a structural part.  Printed this at 100% infill, .1mm layer lines in PETG, but ABS or ASA recommended.

Tagi