1 / 5
Bag Clip Shark (with lock, print in place)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
print-in-place bag clip
- Ocena
- 4,847 / 5
- Polubienia
- 1327
- Pobrania
- 7281
- Wydruki
- 63
- Wyświetlenia
- 17 391
- Oceny
- 59
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Standard Digital File License
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 63) (Komentarze: 73)Remiksy (0)Kolekcje (1649)Powiązane
If you like this one, check out the crocodile version too.
Recommended print settings:
The tolerances were designed for 0.2mm layer height printing and for the original size of the model. Please use my shared print file since using a different scale or layer height might mess up the tolerances.
0.40mm nozzle
0.20mm standard profile
15% gyroid infill
Commercial License:
You can subscribe for a commercial license membership on my Patreon.