P5 Muto II Wide-Angle Pinhole camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Schlem's excellent Muto pinhole camera. While I loved the idea of the original, I was not too keen…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a remix of Schlem's excellent Muto pinhole camera.
While I loved the idea of the original, I was not too keen on how heavily it relies on tape for light-proofing. So I designed a new front for it. The hex plate now has a pretty solid light trap so that if tape is used, it's just for holding it if it ever comes loose.
I also re-designed the shutter so that it's easier to operate.
The pinhole is now held by a small retaining disk so that it's more secure than ever.
I also changed the tripod mounts by a set of Manfrotto PL200 compatible quick release tripod plates. If you want to use a 1/4-20 screw instead, you can use the P5 Muto original parts.
I printed the front plate with 20% infill.
The hex plate was printed at 20% infill with a brim as the exterior baffle is not very wide.
The shutter was printed at 20% infill.
The retaining disk is printed at 20% infill with a brim as it tends to get loose on the glass plate.
The parts fit together very tightly so a good de-burring and light sanding is required.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Resolution:
Standard 0.2
Infill:
20%
Filament: AMZ3D PLA Black
Category: Camera